You don't know these advantages and disadvantages of Marble Sculpting

stone sculpture are often seen in our lives. I don`t know if you have seen Marble Sculpting. It doesn`t matter if you haven`t. Next, I will introduce the advantages and disadvantages of Marble Sculpting in detail for you. Hurry up Follow us to find out.

Marble Sculpting is also called concrete stone carving. It is a material extension of Stone Carving in a general sense. Concrete is used as the main raw material for stone carving. The application of concrete originated in ancient Rome. China has also introduced the use of this mixed hardened material for construction after the reform and opening up, and extended it into various fields. .
The Marble Sculpting method after molding is to build a stone carving steel structure in advance. The product is shaped by stone carving mud materials. After the clay sculpture is completed, the outer mold is remade and reinforced with gypsum, and the mixed cement paste is poured into the steel structure. The finished product is indestructible and has a lifespan as solid as architecture after being molded and carved in detail. It is widely used in various outdoor, squares, parks, theme places and other large-scale stone sculpture constructions.
1. Advantages
Extremely long life can resist wind and sun, long-term humidity and water immersion and other long-term harsh environments.
The cost is relatively low and the materials are easy to obtain. The longer the unbreakable time, the higher the compression resistance.
Corrosion resistance It has strong resistance to the atmosphere, water and general concentrations of acids, alkalis, salts, and various oils and solvents.
Strong insulation Cement as a building material is an excellent insulation material, and it can still protect good dielectric properties at high frequencies.
Marble Sculpting
Cement with strong water resistance and better maintenance can maintain the original hardness and firmness for a long time after soaking in water for a long time.
2. Disadvantages
The degree of fineness is not as fine as other indoor craft materials, so it is not suitable for the production of indoor decorations.
Cement products with the same bulk are several times heavier than other material products.
The operating time is tight. The initial setting of materials under conventional conditions is not less than 45 minutes at a temperature of 25°C, and the final setting is not more than 600 minutes. This is a test of the technician's speed.