stone crafts are very ornamental, which we all know, and stone crafts are widely used in our lives, so what do you know about the production process of stone crafts, the following stone crafts manufacturers Let me talk about the production process of stone art in detail for you, follow us to find out.
1. According to the determined picture, analyze and stake out the stone art on the computer, and enlarge it to the height required by the stone art with a reasonable and coordinated ratio.
2. Proofread and refine the modeling pictures, and confirm the production after optimization and review by Shi Yijia. After the picture is confirmed, the stylist will cooperate with Shi Yijia to shape according to the picture.
3. After the modeling of the stone crafts is completed, the structural engineer analyzes the inner steel frame structure, gravity, and load-bearing bearings to make the stability reach level 10 or above for wind resistance, and then conduct three anti-rust treatments on the surface of the inner steel structure.
4. The steel structure support in the forming process is completed, and engineers and technicians are responsible for lofting, blanking, cutting, artistic forging, splicing, welding, grinding, surface treatment and forming. The surface can be sandblasted matte, mirror brushed, smooth and uniform, with no obvious change, large color difference, rust, and uniform gloss.
5. For cutting, the tool used is electric scissors. When cutting, keep your hands steady. After cutting, the material should be sharpened according to the shape required for the job. Do not leave any hard damage on the surface of the board, so as not to leave any defects after polishing.
6. A method for making carbon steel plate and stainless steel plate stone art. When forging points, the round head of the hammer head should be used to make it forge continuously, evenly and regularly. The width, narrow distance and force should be the same, do not knock randomly, otherwise it will destroy the overall sense of stone art.
7. When the shape of the stainless steel is forged correctly, it should be welded together according to the work requirements. For carbon steel plate and stainless steel polishing, first use the grinding wheel to polish the weld seam and redundant parts of the workpiece, so that the workpiece can be thrown out bright and has a visual aesthetic.
8. Large and simple stone crafts do not need to be welded. The calculation accuracy of the scale and size of the skeleton is high, and the joints should be accurate, otherwise there will be differences and the expected effect will not be achieved.