What are the tips for making Stone Garden Decor

As stone sculpture are more and more widely used in our lives, we are more and more appreciative of stone sculpture. At this time, stone carving manufacturers will design various types according to the environment, and most of the stone sculpture we often see outdoors are It is made of stainless steel, which requires us to maintain and maintain it regularly. So what are the specific production skills of Stone Garden Decor? The following Stone Garden Decor manufacturers will introduce it in detail for everyone. Follow us to find out.

The first is the design of the Stone Carving, which is mainly aimed at the needs of customers. When designing the Stone Garden Decor, its environment should be considered, so as to determine its content, form, color, etc., and design a complete Stone Garden Decor plan. .
1. Fabrication of the Endoskeleton
According to the Stone Garden Decor model, the required height is calculated in proportion. The inner skeleton of the stone carving is welded by stainless steel pipe and stainless steel flat steel. All the Stone Garden Decor load-bearing skeletons are fully welded on both sides. all over.
2. Stainless steel processing
① Cutting material: Generally, the tool used is electric scissors, which can cut thin plates below 2mm, but the flatness after cutting is not good. There is also a cutting machine, which can cut both thick and thin plates, but it can only cut straight lines, and there is nothing to do when encountering arcs. If you want to cut the stainless steel sheet into a flat shape and a variety of shapes, use plasma cutting.
②Forging: Take the stainless steel plate to the mold and knock it on the ground. According to the different shapes of each part of the model, the material is lowered out, and the material is knocked consciously according to its ups and downs. The bend is bent and the edge is knocked. It can be knocked on any tangible and solid object, and then the knocked stainless steel plate is taken to the mold for comparison. It is believed that the shape is correct and can be completely closed with the model, and then these scattered carbon steel plates and stainless steel plates are removed from the top. Until the next piece is welded, each piece must be adjusted against the mold, and the texture effect of the surface of each stainless steel plate must remain the same, which must be forged while making the shape. It is also possible to forge the points first and then cut the material. When forging the points, use the round head of the hammer to forge them evenly and regularly in a row. The width and distance and the force should be the same.
③Molding: welding, grinding and painting. After the shape is forged correctly, they must be welded together according to the requirements of the work. For stainless steel polishing, first use a grinding wheel to smooth the weld seams and excess areas of the work, and then use a soft wheel (cloth wheel) for polishing. When polishing, the work is coated with polishing paste to increase lubrication, so that the work is thrown brighter, so as to give People have a good visual aesthetic feeling. Finally, paint the car according to the needs.
④The last step is installation: generally welding is relatively firm, that is, the skeleton of the stone carving itself is welded with the embedded iron on the base, and the steel bars are welded under the embedded iron. The length of the steel bars and the size of the embedded iron are determined according to the size of the stone carving. For the sake of beauty, after the stone carving is installed, the base will be pasted with marble or granite slabs.