Things to note about polishing landscape boulders

I believe everyone has seen landscape boulders in life. As one of the common modern stone sculpture, they are very popular among people. We onlookers do not know the production and manufacturing process of stone sculpture. The polishing process of landscape boulders is indispensable.

1. When the surface is fully covered with wax, you can start the polishing process. If necessary, apply polishing wax on the wheel first.

2. The power of the motor affects the size of the polishing wheel. The rotating shaft of the motor should be matched with the polishing wheel. Place the polishing wheel in the middle of the rotating shaft and tighten it with a wrench tool. Only when the linear speed of the surface of the polishing wheel is uniform can the polishing effect be obtained.
3. If you want to remove the polishing wax on the surface of the workpiece after mechanical polishing, you can use the oil and wax removal liquid. This product has the characteristics of low concentration, fast wax removal, low cost, high efficiency, and neutral product, which will not harm the workpiece. The higher the temperature, High, the greater the concentration, the better the cleaning ability.
4. To obtain the best performance, you must choose the appropriate polishing wax. Use different colors to mark different varieties of polishing wax to avoid confusion. High-content abrasives can speed up the entire polishing process. This process is the movement of the polishing wax and the polishing wheel surface, causing the material to change. become smooth.
In the process of designing landscape boulders, it is necessary to comprehensively consider a variety of different production processes, and at the same time, streamline product positioning must be combined with the actual situation. Of course, in-depth planning of such a landscape boulders must be done. Understand and need to be particularly cautious, and you can naturally make more injection molds.