The usual production process of stone mountain carving

Usually when making stone sculpture, the mold must be made after the shaping of the stone sculpture is completed. The most commonly used mold opening materials in the method of making molds are: stone mountain carving, silicone mold, stone carving steel mold, etc. Today we will talk about Let`s talk about the process and production methods of making stone mountain carving.

There are also different techniques and operating methods for making stone mountain carving. Some of them are mixed with gypsum powder in water and then added with stone sculpture to make the molds, and some are made by adding grid cloth made of stone sculpture to make the molds.
The specific method used to make the stone mountain carving depends on the actual situation of the Stone Carving and the operating habits and techniques of the mold making master. After the stone mountain carving is made, the stone mountain carving must be reinforced. Reinforcement is to strengthen the stone mountain carving. The strengthening treatment of stone carving makes the mold stronger. When removing the mold, ensure that the stone carving is not easy to crack and break. This can ensure that there will be no other mistakes in the production of stone carving products. When closing the mold, it will be smoother and the product will fit tightly. The repair process in the later stage of product processing is not so complicated, which not only saves the process, but also makes it more convenient at this stage of mold surface treatment.
After the stone carving surface is processed, it is necessary to wax the stone carving surface or brush it with a thin layer of silicone. The purpose is to prevent the mold from being damaged during demoulding and to make the product easy to demould.