The production process and characteristics sharing of Stone Garden Decor

The production process of stone carving is constantly iterating with the development of society. The production of stone sculpture ranges from the most primitive natural materials such as clay sculptures, wood carvings, and stone sculpture, to refined bronze stone sculpture, ceramic stone sculpture and other metal or alloy stone sculpture, and then to subsequent artificial composite materials. The development of material technology provides nutrients for the full play of Stone Carving art. After the Stone Garden Decor material was developed, it was quickly used in stone carving art due to its many advantages such as strong plasticity, light weight, high strength, high hardness, good toughness, and relatively low cost. Using Stone Garden Decor technology to make stone sculpture can better quickly reproduce and preserve the works made of clay sculptures for a long time.

1. Mold making
①Clay draft/foam stone carving: The master of Shunyi Stone Garden Decor manufacturer will make the original stone carving manuscript according to the drawings provided by Party A. If Party A cannot provide it, the Stone Garden Decor manufacturer will carry out in-depth 3D modeling, and finally confirm with Party A whether the stone carving is Modifications are required until completion. Wooden mold: After the product size is confirmed, the mold master will make, modify, and confirm it with a wooden mold. We call it the model, that is, the rough shape of the product.
②The plaster mold is a one-time mold, and generally only one or two products can be produced.
③The Stone Garden Decor mold can be directly covered on the wooden mold. The Stone Garden Decor mold can be used for a long time after it is formed, and the service life is about 80-120 products, depending on the specific product shape.
2. When making the white embryo, first apply the gel coat on the surface of the mold with a brush. Welcome to exchange and cooperation, Stone Garden Decor. Then spread the fiber cloth on the surface of the mold, and then use a brush to brush the resin on the surface of the Stone Garden Decor mold to make it penetrate thoroughly, then lay and brush the resin, layer by layer, to reach the required thickness, the thickness of the Stone Garden Decor depends on the product situation depends.
3. demoulding, trimming. Demoulding refers to removing the blank from the mold.