Talking about the design and production process of Stone Garden Decor

I believe everyone is very familiar with stone carving, we can often see it in life, but about the design and production process of Stone Garden Decor, everyone must be very strange, Stone Garden Decor is a kind of urban cultural civilization, it is A kind of communication about historical context and cultural information. Next, the Stone Garden Decor manufacturer will talk about the design and production process of Stone Carving in detail for everyone, let's take a look together.

Stone Garden Decor The finished mud should be placed in a jar or other containers, and covered with a damp cloth or plastic cloth to maintain a certain humidity for later use. The skeleton of stone sculpture is usually made of wood, wood blocks, iron wire, steel bars, iron nails, The skeleton of a clay sculpture is like a human skeleton. It is the basic condition of clay sculpture and cannot be ignored. Pay attention to the skeleton of stone sculpture. The skeleton must be firm to ensure the stability of the clay sculpture. It will not tilt or collapse after being filled with clay. After the mud is piled up, make sure that it does not fall off the mud and does not expose the frame. To reflect the general shape of the stone carving. The frame used should be simple and easy to change and disassemble when making molds.
Then, during the construction process of the stone carving, water is sprayed on the skeleton first, so that the mud block and the skeleton can be firmly combined and not easy to fall. When applying mud, put the mud blocks on the skeleton one by one, press them tightly with your hands, and then add mud layer by layer, and use a mallet or a mud board to smash the mud firmly and stick it firmly. Stone carving is a three-dimensional entity. Every time a piece of mud is added, the relationship between various perspectives must be taken care of. The stone carving table must be turned frequently to observe and compare constantly. The mud should not be piled up at once, as long as it can be piled up into a large shape.
With the deepening of parts and details, the volume of clay sculpture is gradually in place. To make a part should always be compared with the whole, so that the part is subordinate to the whole. In the process of in-depth shaping, stone carving must constantly adjust and grasp the relationship between the whole and the part, and deal with the relationship between the part and the details. Only when the whole is grasped accurately can the part be done correctly, and if the part is done accurately, the whole will be enriched and perfected.
In the in-depth stage of stone carving production, it is inevitable that some local details will be overly prominent, the major turning point of the shape will be weakened, the shape will be lack of coherence or the processing will be rigid, etc. In the stage of adjustment and unification, it must be adjusted to the overall large relationship come up.
During the production process of Stone Garden Decor, attention should be paid to spraying water on the clay sculptures frequently, especially in summer when the water is easy to volatilize, so it is necessary to spray water regularly to keep the clay at a suitable dryness and humidity in order to shape the shape. In winter, when the temperature is low, if the clay sculpture is not kept warm, the whole clay sculpture will loosen and crack after freezing. Therefore, it is necessary to work in a warm indoor studio, so that the clay sculpture is not conducive to loosening and cracking.