stone mountain carving and polishing process

Shishan carving scheduling equipment: Generally, welding is firm, that is, the frame of the stone sculpture itself is welded to the embedded iron on the base, and the steel bars under the embedded iron are welded. The length of the steel bar and the size of the embedded iron are determined according to the size of the stone sculpture. For the sake of beauty, usually after the stone carving of the equipment is completed, the base will be attached with a marble or granite slab.

The maintenance of stone mountain carving is a very important issue. They should have standard cleanliness and be maintained in a dry environment. When cleaning the stone mountain carving surface, be careful not to scratch the surface, avoid using detergents with bleaching ingredients and their abrasives, wire brushes, abrasive tools, etc. In order to remove the detergent, rinse the surface with clean water after washing. Then clean with a straw brush, finishing with a soft brush. Do not use metal polish, water, or any other solvent. This will discolor the copper.
1. Conduct a preliminary inspection of the welding workpiece to confirm that there are no traces of missing welding on the stone mountain carving workpiece. If there are any problems, they need to be repaired from the beginning in the previous process.
2. Mirror stone mountain carving, the mirror is driven by a high-speed motor, and wool wheels are sold in the market. Cooperate with Da Qing La and perform mirror polishing according to the previous polishing method. The purpose of this process is to achieve mirror polishing based on the workpiece polished by the previous processes, rather than further cutting. Be careful not to rub the polishing wax onto the covering film on the surface of the workpiece during this process, and be careful not to damage the covering film.
3. Polishing This process is the last process of polishing. Use a clean cotton wheel to rub the surface of the workpiece behind the mirror to clean and brighten the workpiece after all previous processes have been completed.