stone crafts production process

stone crafts, mainly made of sandstone, are a different type of stone carving cultural art. It is a perfect combination of natural travertine and hand-carved. If there is no special requirement for the thickness of stainless steel Stone Carving, it is generally 1.5mm, 2.0mm, 3.0mm. The thicker the board, the harder it is to shape, and the higher the price. The color of the FRP stone carving itself is silvery white with luster.

Different colors can also be applied to the stone carving according to the needs, usually car paint,Application: This product is suitable for outdoor and indoor places such as parks, botanical gardens, gardens, residential areas, squares, shopping malls, hotels, guesthouses, and guild halls. Stainless steel stone carving is a common urban stone carving. Stainless steel is resistant to weak corrosive media such as air, steam, water, and chemically corrosive media such as acid, alkali, and salt. Because stainless steel stone carving have many advantages, many urban stone carving use stainless steel as materials. stone crafts have the characteristics of hard, durable and heavy Chinese natural ancient stone materials, and are rich in rustic beauty. Its strong surface material texture has some subtle changes in light and dark relationships. Simple understanding of natural environment colors, strong sense of age, and more charm It is unique, and its individuality deduces a variety of visual development space design art.

1. Build the frame, covered with large mudstone sculptures
The first step in the production process of stone crafts design and production technology is that we can make the skeleton of the stone carving. After the skeleton is ready, we will start to shape the large mud and stone carving. When this problem occurs, Chinese stone carving need to spray water frequently to prevent them from cracking. When needed, cover with plastic film material for moisture retention.
2. Shape and notify the customer to confirm the effect
stone carving molding needs to be sprayed on any shape at any time. For example, after the plastic surgery is completed, the customer will be notified for review and modeling suggestions to see what needs to be improved until the customer is satisfied. After the customer confirms, the overall light will be promoted on the red clay.
3. Turning over the mold, demoulding, repairing the mold, fine grinding
Once the plasticine is confirmed, the plaster mold is then turned to the system to make the plaster mold, the demoulding is to remove the residual mud from the block mold, the plaster mold is carefully repaired, and the pattern is made to be ground and polished.
Fourth, make sandstone
When making sandstone on the ground, it is necessary to mix the resin, sandstone and color paste in a reasonable proportion, and brush the wall paint on the surface of the Chinese mold material. After the paint is dry, pour the prepared resin, sandstone and color paste into the mold Pressing, each different position information must be pressed, and after curing, it can be released from the product design. Up to here, the stone carving has become a finalized problem as a basic problem.
5. Splicing modules, gap repair and overall grinding
After the above steps, the next step is to combine the data into blocks. After the combination is completed, the gaps can be filled and reinforced. Finally, the enterprise only needs to polish a place to be polished and it will be OK.