Solutions to different damages of Landscape Stone

Landscape Stone play an important role in improving the quality of urban ecological environment and conveying public emotional communication. At the same time, Landscape Stone are also of great significance in showing the overall style of the city, enhancing the overall image of the city, and creating potential economic value.

The Landscape Stone is used as an outdoor stone carving, which needs to be exposed to the wind and the sun, and it will inevitably be damaged. So do you know how to solve the damage of the Landscape Stone?
There are five common damages to Landscape Stone, namely rust, grease, dust, residual adhesive and welding defects
1. Rust
Rust is visible before or during the manufacture of Stone Carving products or equipment, indicating that the appearance is seriously polluted. Before the equipment is put into use, it must be derusted. Fully finished surfaces should be checked by iron test or water test. If the rust on the stone carving products is serious, you can spray the oxalic acid cleaner on the rust, wait for a minute and wipe it with water.
2. Grease
Organic substances such as oil, grease or even fingerprints will be the source of localized corrosion. Since these substances act as a barrier, they interfere with chemical and electrochemical cleaning and must be thoroughly cleaned. In addition, the effects of pollutants such as paint, chalk, and markers are similar to the effects of oil and grease. It is recommended to wash with a clean brush and clean water or alkaline cleaner, or use high-pressure water or steam.
3. Dust
Landscape Stone production is often carried out in dusty places, and there is often a lot of dust in the air, which constantly falls on the surface of the equipment. They can be removed with water or alkaline solutions. Adhesive grime, however, requires high-pressure water or steam to remove.