Share the skills and methods of Landscape Stone repair

Defects, holes, seams, and cracks of Landscape Stones are problems that occur after long-term use of marble and various Landscape Stones.

Landscape Stone sculpture

1. Repair the defect surface
After long-term use of marble carving, it is inevitable that there will be defective parts. Before repairing the defective surface of marble, the defective part should be cleaned up and the dust should be sucked up with a vacuum cleaner, and then the discarded Landscape Stones of the same quality should be used, and the discarded Landscape Stones should also be cleaned up. Cut to the size of the defect, seal it, and then grind and polish it.
2. Repair hole surface
The hole in the Landscape Stone is also a defective part of the Landscape Stone formed after long-term use. Of course, the hole must be cleaned before the marble hole is repaired, and then the dust is sucked up with a vacuum cleaner, and then smashed with the discarded Landscape Stone of the same quality. The Landscape Stone should also be cleaned and filled with resin glue. The filling is slightly higher than the stone surface by 3~4mm.
3. Repair the stitching seam
Some Landscape Stones will have joints during the laying process. If the joints between the Landscape Stones have not been strictly treated, it will inevitably cause a black seam to form between the Landscape Stones. Beforehand, clean the black seams with a needle, a blade, or a slotting machine, and then use a vacuum cleaner to clean the dirt in the black seams. It is best to use a strong glue to adjust the color to a stone-like color to fill up all the seams.
4. Repair cracks
Cracks are also one of the problems that will occur after long-term use of Landscape Stones. To repair marble cracks, the dirt in the cracks must be cleaned first, and then the dust in the cracks should be sucked up with a vacuum cleaner. It is best to use crack repair glue. Repair cracks.