Production of landscape boulders Molds

landscape boulders manufacturers talk about the production of landscape boulders molds. Making landscape boulders shaping molds is a very important step. Rolling is an important step, so that the bottom of the mold will give you detailed instructions on the steps of the landscape boulders shaping process, and prepare to make landscape boulders products. Materials and tools required.

With the proportions prepared in advance, the landscape boulders mold design draft can be shaped into character stone sculpture, animal stone sculpture, etc. according to the sludge. For example, the silicone replica mold cartoon stone carving shape is completed by mixing the gypsum powder into a paste and adding water to the outside of the silicone mold for protection. Model, but note that the requirements for the consistency of the plaster are very high, and the model can be completed by the teacher due to the blending and then applying to the staff. In one step, the mold is basically completed, and the mold is brushed on the mold.
The Stone Carving manufacturer slowly pours the resin into the mold in proportion to prevent air from entering the inside of the resin to prevent the quality and life of the landscape boulders from being shortened. After the resin solidifies, the process can be solved.
After the white embryo of the landscape boulders products is formed, it will be repaired, glued, polished, painted and baked. The above are the six steps of the landscape boulders process. Sometimes customers also need to make imitation sand stone sculpture, cast copper stone sculpture, bronze stone sculpture, and imitation stone. For stone sculpture, etc., we need to print surface effects to achieve the desired effect.
landscape boulders are made using the hand-paste molding method. Before production, the mold can be divided into several units and copied according to the shape characteristics of the stone sculpture and from the perspective of easy molding and demoulding. Based on this, unit products are formed and then assembled into a whole. After the entire product is processed and painted, a landscape boulders work is completed. After the stone sculpture is cured, cut the entire mold along the divided unit blocks. When cutting, be careful to cut the stone sculpture layer and silicone rubber layer together. Make connecting ribs between unit blocks, and slots should be set at the connecting ribs to ensure that the unit block mold set is integrated into a whole through the connecting ribs. After the above work is completed, demould the stone carving unit block, then take off the silicone rubber layer, and put the removed silicone rubber block immediately back into the stone carving unit mold.