How to maintain Stone Garden Statues

Although the Stone Garden Statues is corrosion-resistant, if it is used for a long time and maintenance is neglected, the service life of the Stone Garden Statues will be greatly shortened. The Stone Garden Statues manufacturer will tell you about the maintenance of Stone Garden Statues.

The exterior color of ordinary stone sculpture can only be colored with baking paint instead of electroplating. Therefore, if it is exposed to the sun for a long time and in a humid environment, it must be well maintained, otherwise it will fade, drying, cracking, fading and other phenomena, so surface maintenance is very important.

If it is often placed outdoors, you only need to pay attention to the sun exposure. When it is exposed to the sun, spray some water on the surface appropriately to prevent the surface temperature from being too high. If the temperature is too high, the surface baking paint will easily appear hollow. phenomenon, leading to cracking. Simulated animal stone sculpture placed indoors are usually placed to prevent them from being wet and cold for a long time. If they are too wet for a long time, the decay rate of the stone garden sculptures themselves will be accelerated. If the ground becomes damp, you can add a base underground to avoid direct contact between the stone sculpture and the ground and reduce the generation of moisture.
1. Regular cleaning: Clean the Stone Garden Statues regularly and clean it regularly. When cleaning, first wipe the surface of the statue with neutral detergent, and then wipe the surface of the stone carving with a lint-free cotton towel. For dirt with a large area, you can spray it with a manual spray gun and then clean it with a dry cloth. Remember to use a gentle posture;
2. Dry environment: Some stone sculpture must be placed in an unventilated environment, while stone garden sculptures must be placed in a dry environment for maintenance;
3. Avoid sweating: Sometimes some personal sweating can also cause corrosion of Stone Garden Statues. Therefore, it is recommended to wear gloves when holding. One is to prevent Stone Garden Statues from scratching their arms, and the other is to prevent sweating from causing corrosion of stone sculpture;
4. Gap cleaning: When cleaning the gaps between Stone Garden Statues, you should first wet the cotton ball and then wipe it, and wipe it along the gap from beginning to end to avoid being ignored. Remember not to scrub directly with a wet cloth;
5. Cleaning of heavy stains: If the stains on the steel sculpture are too heavy, first blow them with a cold air blower, then clean them with a straw brush, and then clean them with a soft brush. Do not use metal polishes and organic solvents;
6. Scratch repair: As long as the scratches on the Stone Garden Statues are not serious, they can be ground, polished and repaired. In addition, in daily life, it is necessary to avoid stone sculpture being scratched into serious scratches that are difficult to solve;
7. Waxing maintenance: After cleaning the Stone Garden Statues, apply a thin layer of microcrystalline wax (i.e. colorless wax), basically once a year.