Do landscape boulders require care and maintenance?

The cleaning of landscape boulders should be carried out regularly. It is not appropriate to not clean it for a long time or to clean it many times in a short period of time. Usually it should be placed in a relatively dry environment, which will help prolong its use time.

Before cleaning up, we should wear gloves to prevent the sweat from our hands from dripping on the stone sculpture. The salt in the sweat will corrode the stainless steel. If there is a lot of dust on the surface, you can blow it with the cold wind of the hair dryer before proceeding to the next step.
If there is some dirt on the surface during the cleaning process of the landscape boulders, you can use soapy water or warm water to scrub. The surface of the newly shipped stainless steel is usually labeled with a trademark. The trademark is not easy to clean because of the glue on the bottom layer. You can choose to use some weak detergent to clean that layer of bottom glue.
You can also choose to scrub with alcohol, but you cannot use some cleaning tools with relatively hard materials, which will damage the gloss of the stone carving surface. If there are oil stains such as grease on the surface, you can wipe it with a soft cloth, or use detergent to clean it.
Don`t miss the gaps when cleaning the landscape boulders. We can wet the cotton balls and wipe the gaps, and there must be no omissions. After all the cleaning work is finished, use a soft brush to gently sweep the Stone Carving from beginning to end.