Design and production of Marble Sculpting

With the continuous improvement of people's aesthetic requirements, marble sculpture has gradually become an important part of our public space today. Marble Sculpting is a common urban stone carving. Stainless steel is resistant to weak corrosive media such as air, steam, water, and chemically corrosive media such as acid, alkali, and salt. Because Marble Sculpting have many advantages, many urban Stone Carving use stainless steel as materials. FRP stone carving are generally welded.

which is relatively firm, that is, the skeleton of the stone carving itself is welded with the embedded iron on the base, and the steel bars are welded under the embedded iron. The length of the steel bars and the size of the embedded iron are determined according to the size of the stone carving. For the sake of beauty, usually, after the stone carving is installed, the base will be pasted with marble or granite slabs. The color of the FRP stone carving itself is silvery white with luster. Different colors can also be applied to the stone carving according to the needs, usually car paint. 2. Application: This product is suitable for outdoor and indoor places such as parks, botanical gardens, gardens, residential areas, squares, shopping malls, hotels, guesthouses, and guild halls. From the perspective of the development research process, the art of public management is produced and developed on the basis of the continuous innovation and development of socialist economic and political education. With the change of corporate social living environment and cultural construction background, the scope of public art has also undergone tremendous changes. As far as marble sculpture is concerned, its transformation from private appreciation to public art has promoted its value transformation. Therefore, it is of great practical significance to analyze the value of marble sculpture in the field of public art.

Upfront Design Any product needs to be conceived and designed before production. Unlike FRP stone carving, Marble Sculpting can be made in batches through molds. The shape of each stone carving may be different. Therefore, compared with FRP stone carving, it is more difficult to make. A good design can make a Marble Sculpting stand out. Therefore, it is necessary to design detailed drawings in the design, and design the size drawing and effect drawing in advance, and show them in front of the designer and guests. All of these are considered through professional drawing software, the installation site is inspected during the design process, and the influence of materials, craftsmanship, and site environment is comprehensively considered. The Marble Sculpting in the production stage is forged. Before making, the whole Marble Sculpting will be divided into several units from the perspective of easy forming according to the shape and characteristics of the stone carving. In this way, unit products are formed, then they are combined into a whole, and finally the whole is processed. Some customers may have color requirements for Marble Sculpting, but these colors are painted with car paint. In this way, a rough Marble Sculpting is completed. After shaping, polishing, polishing After the Marble Sculpting is completed, it needs to be polished. From the end of the stone carving, mix some abrasives, paste the product. After the last part is pasted and fixed, continue to paste the product with the clamping mold. If the molding operation is convenient, more mold unit blocks can be assembled at one time. Doing this, leaves a block of cells at the end. The unit blocks are prefabricated and glued to the overall stone carving. After the final treatment of the first three steps, the last step is to repair some defects and flaws after the product is demoulded to produce surface effects. So, a beautiful stonework is done!